Kenshine Pump Valve MFG Co.,LTD

Free Member

Kenshine Pump Valve MFG Co.,LTD was founded in 1995, main in producing and supplying products like pump, industrial pump, centrifugal pump and so on, our products are selled to Asia, Middle East, Africa and other markets.

Note: Although many products are similar in appearance, but each product models, specifications, parameters and useful are different, please refer to the details of each product as the standard, select the products you need, if you have any special needs, please feel free to contact with us.

Products List 30

  • ZD Single phase explosion proof self priming pump

    ZD Single phase explosion proof self priming pump

    ZD Single phase Explosion proof methanol self priming pumpZD single phase explosion proof self priming  pump is developed by our company as the stainless steel self-priming micro pumps. Pump impeller adopts semi-open structure. Pump body and impeller are made of stainless steel material and driven by aluminum motor. The pump has corrosion resistance, reliable performance, convenient in operation and maintenance, compact structure, low energy consumption, good seal performance etc advantages.ZD Single phase explosion proof methanol self p...

    Flow rate: 2-220L/MIN

    Head: 10-30M

    pump material: stainless steel

    centrifugal pump: self priming pump

  • YW Submersible drainage sewage pump

    YW Submersible drainage sewage pump

    YW series high efficiency non-clogging submerged pump, GW type pipeline sewage pump, LW type (WL) vertical sewage pump are our major lines as drainage sewage pumps.YW series high efficiency not clogging submersible pumpYW series of high efficiency non-clogging submerged pump is used for the polluted wastewater discharge in factories or business zones and sewage drainage in sewage station of main housing, urban sewage treatment plant water system, civil air defense system drainage stand, waterworks water supply equipment, hospital, hotel of se...

    Flow rate: 2-600m3/h

    Head: 3-50m

    pump material: cast iron or stainless steel

    centrifugal pump: transfer pump

  • KCB Stainless steel gear oil transfer pump

    KCB Stainless steel gear oil transfer pump

    KCB Stainless steel gear oil transfer pumpKCB,2CY Series gear oil pumpKCB Series gear oil pump is suitable to transport various oil such as crude oil, diesel oil and lubricating oil. The KCB pump with bronze gears can be used to transpot liquids with low flash point such as gasolene and benzene etc. The medium temperature can not be higher than 70℃. Anti high temperature gear oil pump with anti high temperature material can transport the liquids which temperature is no more than 300℃ and viscosity is 5×10-5~1.5×10-3m2/s.2CY Se...

    Flow rate: 2-100m3/h

    Head: 3-145m

    pump material: cast iron or stainless steel

    Gear pump: transfer pump

  • WQ Submersible drainage sewage pump

    WQ Submersible drainage sewage pump

    WQ series submersible sewage pump is a domestic automatic control submersible pump, which has unique functions in discharging wastewater or waste liquids with solid particles and long fiber etc impurity. WQ pumps discharging outlet :50 to 600mm, flow:10 to 7000m3/h, head :5 to 60m, power: 1.5 to 315KW, the solid particle diameter from liquids: 20 to 145mm.WQ submersible sewage pump is mainly used in municipal engineering, industry, hospital, construction, hotel, hotel and other industries. WQ submersible sewage pump is used to discharge sludge,...

    Flow rate: 2-600m3/h

    Head: 3-50m

    pump material: cast iron or stainless steel

    centrifugal pump: transfer pump

  • LW Vertical drainage pump

    LW Vertical drainage pump

    LW Vertical not-clogging sewage pump is used to transfer the waste water with fiber diameter 5 times as pump diameter or the solid particles diameter 50% as the pump diameter. LW vertical not-clogging sewage pump adopts a unique single (double) channel impeller and improves the sewage discharge for the not-clogging.LW sewage pump has two structural forms. One is the motor and pump directly connected coaxial and the other is the use of coupling connection. The motor adopts a standard vertical motor. Its structure diagram is as follows. Each str...

    Flow rate: 2-400m3/h

    Head: 3-50m

    pump material: cast iron or stainless steel

    Motor: explosion-proof motor or non explosion proof motor

  • IHF Steel lined with fluorine plastic centrifugal pump

    IHF Steel lined with fluorine plastic centrifugal pump

    IHF Series single stage single suction fluoroplastic alloy centrifugal pump in chemical industry is manufactured as international design and principle of nonmetal pump. The pump has the advantages such as anticorrosion and wearable and anti-high temperature and no aging and high mechanical strength and no toxin decomposer etc. Liquid temperature: -50℃-200℃Characteristic:IHF pump body is metal shell with FEP(F-46) lining. Impeller and pump cover are punched by metal with fluoroplastic lining. Shaft seal bellows mechanical seal set outsid...

    Flow rate: 2-100m3/h

    Head: 3-80m

    pump material: steel lined with fluorine plastic (FEP)

    centrifugal pump: chemical pump

  • FP RPP centrifugal pump

    FP RPP centrifugal pump

    FP Series reinforced polypropylene corrosion resistance centrifugal pumpSummary:FP Series reinforced polypropylene corrosion resistance centrifugal pump has the advantages such as advanced structure, small volume, light weight, energy-saving and good seal and corrosion resistance etc. The pump is widely used to transport the acid and alkali and salt etc corrosive liquids in chemical industry and light industry and waste dealing etc. FP Series reinforced polypropylene centrifugal and FS Series etc pumps all use the mechanical seal and are ma...

    Flow rate: 2-100m3/h

    Head: 3-50m

    pump material: RPP (reinforced polypropylene plastic)

    centrifugal pump: chemical pump

  • GBF Fluorine plastic lined vertical centrifugal pump

    GBF Fluorine plastic lined vertical centrifugal pump

    GBF Pipeline centrifugal pump lined with fluorine plasticGBF type fluorine lined pipeline centrifugal pumpFluorine plastic is the most excellent corrosion resistant material. GBF type fluorine lined pipeline centrifugal pump is made of cast iron or cast steel lined with fluorine plastic.GBF fluorine lined pipeline centrifugal pump is with domestic excellent hydraulic model and adopts IS centrifugal pump performance parameters on the basis of the general vertical pump design.GBF type fluorine lined pipeline centrifugal pump has the adva...

    Flow rate: 2-200m3/h

    Head: 3-50m

    pump material: Fluoroplastic liner

    centrifugal pump: chemical pump

  • WQK Submersible sewage pump with cutting disc

    WQK Submersible sewage pump with cutting disc

    WQK Submersible sewage pump with spiral shape cutting type impellerPump introduction:WQK Series submersible sewage pump with spiral shape cutting type impeller has the high efficiency. It can cut Straw, cotton, cloth, baby diapers and other similar wastes etc and then discharge them.WQK non-clogging submersible sewage pump has the new design, beautiful appearance, high efficiency, energy saving etc ,using half open spiral shape cutting type impeller.The impeller and cutter blade are integral and especially suitable to cut plastic bags, clo...

    Flow rate: 2-300m3/h

    Head: 3-30m

    pump material: cast iron or stainless steel

    centrifugal pump: sewage pump

  • RPP reinforced plastic water jet vacuum pump unit

    RPP reinforced plastic water jet vacuum pump unit

    RPP series water jet vacuum pump is made of the reinforced pp plastic injection molding with high mechanical strength and strong corrosion resistance. The surface is bright and clean and has simple structure, small volume, a long service life, large displacement, high vacuum degree etc. RPP vacuum pump can be a good alternative water ring vacuum pumps and reciprocating vacuum pump.The pump is used to pump corrosive gas with temperature up to 150 degree Celsius. RPP vacuum pump can be used together with steam jet pump in series to obtain highe...

    Flow: 20-500m3/h

    Vacuum degree: 0.098MPA

    pump material: RPP (reinforced polypropylene plastic)

    centrifugal pump: chemical pump

  • KSY explosion proof oil water centrifugal pump

    KSY explosion proof oil water centrifugal pump

    Pump introduction:KSY  explosion-proof X oil-water high-pressure pump by aluminum alloy and copper impeller flow channel type combination this series of large flow high lift self-priming speed low cost advantage may transport energy consumption of methanol gasoline alcohol kerosene, diesel and other flammable and explosive medium is suitable for the industrial and mining enterprises dengfeng station terminal mine site drainage cycle at the same time also can be used as explosion-proof pump can be according to customer's requirements with ca...

    Flow rate: 120-1250L/Min

    Head: 15-30m

    pump material: aluminum alloy

    centrifugal pump: explosion-proof motor

  • W Vortex booster water pump

    W Vortex booster water pump

    W Vortex pump is a vane pump.  W vortex pump is mainly composed of impeller, pump body and pump cover. Impeller is a disk, the circumference of the blade radial uniform arrangement. The pump body and impeller form a circular flow path, suction inlet and discharge outlet are in the outer circumference of the impeller. There is a clapboard between the suction inlet and the discharge outlet, thereby separating the suction inlet and the discharge outlet.USES:W single-stage direct-connect vortex pump is used for pumping water or other liquids ...

    Flow rate: 1-15m3/h

    Head: 3-125m

    pump material: cast iron or stainless steel

    vortex pump: transfer pump

  • FZB fluorine plastic self priming pump

    FZB fluorine plastic self priming pump

    FZB,FZB-L Series fluoroplastic self priming centrifugal pumpFZB series fluoroplastic self-priming pumps are manufactured according to the international standard combined with the process design of non-metal pumps. Pump body is made of a metal case lining fluoride plastic and flow components are all made of fluoroplastic alloy. It means that pump cover, impeller, etc are made of metal lined with fluorine plastic .Shaft seal is for bellows mechanical seal fitted outside type and static ring is 99.9% alumina ceramic (or silicon nitride)and dyn...

    Flow rate: 2-100m3/h

    Head: 3-50m

    Pump material: PVDF,FEP,

    centrifugal pump: self priming pump

  • KS Vertical FRPP,PVDF plastic centrifugal pump

    KS Vertical FRPP,PVDF plastic centrifugal pump

    Washing tower circulating pump adopts FRPP, PVD and other plastic injection molding. The pump can be used in most chemical solution, acid and alkali resistance and can idle. The pump will not be damaged by idling. The vertical plastic pump is suitable for all kinds of resistance to acid circulation, cooling, spray cleaning equipment, exhaust tower, the etching machine, chemical plating, no special occasions, such as electrolytic nickel have dry shaft seal design, can protect motors, prevent corrosive gas from entering the bearing cause damage,...

    Flow rate: 250-1700L/M

    Head: 3-38M

    pump material: FRPP,PVDF

    centrifugal pump: transfer pump

  • IS,IR Single stage end suction centrifugal water pump

    IS,IR Single stage end suction centrifugal water pump

    IS single stage single suction (axial suction) centrifugal pump is the developed energy saving pump at the base of BA, B and other single stage clean water centrifugal pump . The advantages of single stage single suction centrifugal pump: the whole series of hydraulic performance layout is reasonable and the user choice range is wide and convenient maintenance an the efficiency and suction range reach the international average advanced level.IS Single stage single suction centrifugal pump is suitable for industrial and urban water supply and dra...

    Flow rate: 2-400m3/h

    Head: 3-125m

    pump material: cast iron or stainless steel

    centrifugal pump: transfer pump

  • ZWL Self priming sewage pump with closed coupling

    ZWL Self priming sewage pump with closed coupling

    ZWL Series direct-coupled self priming sewage pump:Brief introduction:ZWL Series self priming not-clogging sewage pump is a new structure product which is developed on the base of ZW Series self priming sewage pump with shaft coupling. (ZWL Series self priming sewage pump is direct-coupled between the pump and motor)Features:ZWL Series self-priming not-clogging sewage pump combines self-priming and not-clogging and adopts axial circumfluence outer-mix type. Through particular design of casing and impeller channel, it need not be ...

    Flow rate: 2-600m3/h

    Head: 3-80m

    pump material: cast iron or stainless steel

    centrifugal pump: self priming pump

  • GW Pipeline sewage pump

    GW Pipeline sewage pump

    GW not clogging pipeline sewage pumps adopts unique impeller structure and new mechanical seal, which can effectively transport solid matter and long fiber. Compared with traditional impeller, the impeller of this pump adopts the form of single flow channel or double flow channel, which is similar to a curved pipe with the same size of section, and has very good pass flow ability. It is equipped with a reasonable cochlear chamber, which makes the pump have high efficiency.Characteristics of GW type non - clogging sewage pump1, pump and motor direc...

    Flow rate: 2-1500m3/h

    Head: 3-50m

    pump material: cast iron or stainless steel

    centrifugal pump: sewage pump

  • FPZ polypropylene self priming centrifugal pump

    FPZ polypropylene self priming centrifugal pump

    FPZ Series corrosion resistance self priming pump is the horizontal pump with self priming performance. It is made of reinforced polypropylene plastic (RPP) which is suitable for the liquids between -10℃ and 90℃ and PVDF which are suitable for the liquids between -10℃ and 120℃. Shaft seal is the corrosion resistance mechanical seal with no leak. Impeller and shaft are in-lined for the steady operation and so as not to let the liquids into shaft. Connection method for the pump and motor has two types. One is close couple which has...

    Flow rate: 2-100m3/h

    Head: 3-50m

    pump material: RPP (reinforced polypropylene plastic

    centrifugal pump: chemical pump

  • SZ fiberglass plastic self priming centrifugal pump

    SZ fiberglass plastic self priming centrifugal pump

    SZ type fiberglass reinforced plastics corrosion resistant self-priming pump.The flow components for SZ fiberglass self priming pump are made of the modified phenolic fiberglass reinforced plastic material by high temperature molding.The pump has the advantages such as light weight, high strength, no deformation, high temperature resistance, corrosion resistance and easy maintenance etc.Mechanical seal for the pump is WB2 fitted outside type F4 corrugated mechanical seal which is reliable and has a long service life.SZ type fiberglass self pr...

    Flow rate: 2-100m3/h

    Head: 3-50m

    pump material: fiberglass reinforced plastic

    centrifugal pump: circulation pump

  • FP polypropylene plastic chemical transfer centrifugal pump

    FP polypropylene plastic chemical transfer centrifugal pump

    FP Series polypropylene reinforced plastic chemical transfer centrifugal pump with shaft couplingFP Series reinforced polypropylene corrosion resistance centrifugal pumpSummary:FP Series reinforced polypropylene corrosion resistance centrifugal pump has the advantages such as advanced structure, small volume, light weight, energy-saving and good seal and corrosion resistance etc. The pump is widely used to transport the acid and alkali and salt etc corrosive liquids in chemical industry and light industry and waste dealing etc. FP Series re...

    Flow rate: 2-100m3/h

    Head: 3-50m

    pump material: FRPP/Polypropylene plastic

    centrifugal pump: chemical pump