Products List 26
-
CDLKF Stainless steel submerged multistage centrifugal pump
CDLKF is a self-priming vertical multi-stage centrifugal submerged pump is equipped with standard motor. The motor shaft is directly connected to the pump shaft through the coupling of the pump head. The pump can be equipped with intelligent protector according to the needs to effectively protect the dry rotation, phase loss and overload of the pump. In order to meet the installation depth of the tank or container, the cavity can be installed to change the length of the pump itself. ApplicationCDLKF is used as the conveying machine of ...
Flow rate: 2-16m3/h
Head: 3-200m
pump material: stainless steel
transfer pump: circulating pump
-
ZWL Self priming non clogging sewage drainage pump
ZWL self priming sewage pump is for the structure of closed coupling. Pump is directly connected with the motor. The pump can be made of cast iron or stainless steel material and the pump is used to transfer the wastewater with solid grain or fiber etc impurity.ZWL self-priming sewage pump set is for the structure of closed coupling. The pump is directly connected with the motor. ZWL self priming pump is for non-clogging sewage drainage pump. It need not the bottom valve like a general self-priming water pump. The pump is used to pump the w...
Flow rate: 2-600m3/h
Head: 3-80m
pump material: cast iron or stainless steel
centrifugal pump: self priming pump
-
ZJQ Submersible slurry wearing resistant pump
ZJQ Submersible slurry sewage pump is made of high chrome alloy and driven motor.The pump is equipped with main impeller and stirring impeller so as to pass the liquids with large particle.ZJQ submersible slurry pump main features:1. The whole pump unit is with dry motor up and pump down. The motor adopts mechanical seal protection, which can effectively prevent high pressure water and impurities from entering the motor cavity.2, in addition to the main impeller, there is also a stirring impeller which can be precipitated in the bottom of the s...
Flow rate: 2-600m3/h
Head: 3-80m
Pump material: high chrome alloy
centrifugal pump: sewage pump
-
FSB Fluoroplastic alloy chemical transfer pump
FSB fluorine plastic alloy pump is designed and made according to the international standard. The pump body is made of the metal and FEP (F46) organic combination, pump cover, impeller and shaft sleeve are pressed by molding of fluorine plastic with metal insert. Shaft seal is mounted outside as the bellows mechanical seal. The static ring choose 99% alumina ceramic or silicon nitride, ring with four fluorine filling materials has the good corrosion resistance.FSB fluorine plastic alloy chemical transfer centrifugal pump is suitable for conv...
Flow rate: 2-100m3/h
Head: 3-80m
pump material: fluorine plastic alloy
centrifugal pump: chemical pump
-
ISG pipeline centrifugal vertical water pump
ISG vertical pipeline centrifugal pump is also a single-stage single-suction centrifugal pump, because the design of the vertical structure is also known as the vertical centrifugal pump, this centrifugal pump is designed according to the industry standard performance and size. ISG pump is a new energy-saving pump. It can replace IS type horizontal single-stage pipeline centrifugal pump. ISG pipeline centrifugal pump is suitable for industrial and urban water supply and drainage, but also can be used for agricultural irrigation. ISG pipeli...
Flow rate: 2-1500m3/h
Head: 3-125m
pump material: cast iron or stainless steel
centrifugal pump: transfer pump
-
FYS fluoroplastic submerged chemical centrifugal pump
FYS submerged centrifugal pump is for single stage single suction long shaft submerged pump. The pump is made of fluoroplastic (FEP/F46) material and submerged into the liquids to work.FYS series fluoroplastic alloy submerged pump is a kind of single-stage single-suction long-shaft submerged pump developed and produced by our company. Fluoroplastic submerged centrifugal pump is suitable for conveying corrosive medium with temperature between 0℃ and 120℃ and no solid particles or abrasive impurities.All parts which contact with medium for F...
Flow rate: 2-200m3/h
Head: 3-50m
pump material: F46/FEP/UHMWPE
centrifugal pump: chemical pump
-
FVZ Self priming PVDF chemical transfer centrifugal pump
FVZ self priming centrifugal pump is made of PVDF material and suction height is up 4m. FVZ self priming centrifugal pump has two connection ways for the pump and motor. Closed coupling and shaft coupling.FVZ PVDF Self priming chemical corrosion resistant centrifugal pumpFVZ Self priming PVDF centrifugal pump is made of polyvinylidene fluoride [PVDF] with one injection molding of whole plastic part assembly.The pump has the advantages of light weight, high strength, no toxicity and no pollution and good corrosion resistanc...
Flow rate: 2-50m3/h
Head: 10-32M
pump material: PVDF
centrifugal pump: chemical pump
-
YLB Stainless steel slurry pump for filter press machine
YLB Stainless steel slurry pump for filter press machine.The rated performance point and size for YLB pump meet with the international standard iso2858-1975 (e) and it is the replacement of enamel pump, ceramic pump, rubber lining pump, fluorine alloy pump, F type corrosion pump, IH chemical centrifugal pump.YLB Stainless steel slurry pump for filter press machine is used to convey the corrosive slurry liquids with the temperature of -10℃ to 110℃ (the liquids with particles).The products are widely used in chemical industry, petroleum, ...
Flow rate: 6-200m3/h
Head: 5-125m
pump material: stainless steel
centrifugal pump: slurry pump
-
Fiberglass plastic centrifugal circulating transfer pump
S,FS model is horizontal single stage single suction fiberglass centrifugal pumpSL model is vertical single stage single suction pipeline fiberglass centrifugal pumpSZ model is self priming horizontal fiberglass centrifugal pumpThe flow parts of pumps are punched in high temperature of polyethylene FRP material. The pumps have the advantages such as anti-corrosion and anti-high temperature and light weight and no distortion etc. Shaft seal is F4 bellows mechanical seal of WB2 type set outside to insure longer life for good seal. The pump...
Flow rate: 2-100m3/h
Head: 3-80m
pump material: fiberglass reinforced plastic
centrifugal pump: chemical pump
-
GBW Chemical centrifugal pump for H2SO4
GBW concentrated sulfuric acid pipeline centrifugal pump is designed and made on the basis of ISW horizontal pipeline centrifugal pump for the conveying of concentrated sulfuric acid. GBW centrifugal pump uses the special cast iron and carbon steel materials for concentrated sulfuric acid and excellent hydraulic model.GBW concentrated sulfuric acid pipeline centrifugal pump is an ideal new generation of chemical pump. The pump shaft seal is made of high-quality mechanical seal with external mounting type, and the dynamic ring and static ring...
Flow rate: 2-100m3/h
Head: 12-50m
pump material: special cast iron or carbon steel
centrifugal pump: chemical pump
-
WCB Stainless steel gear oil pump
WCB gear oil pump belongs to low pressure minitype portable energy saving oil transfer pump, which is most suitable for oil barrel transfer in enterprises without power supply, oil transfer in oil refinery, power plant, power station, substation and oil depot, and thin oil transfer in thin oil lubrication system. The gear oil pump with relief valve type can adjust the pressure, can also be directly connected with the refueling gun to refuel. The closed oil gun will not have a destructive impact on the pump and oil pipe. When conveying lubricating o...
Flow rate: 30-100L/MIN
Head: 30M
pump material: cast iron or stainless steel
bronze gear ,steel gear: gear pump
-
LG Vertical multistage centrifugal water pump
LG Vertical multistage centrifugal water pump for high buildingLG series vertical single-suction multi-stage centrifugal pump is used to convey water and other liquids in physical and chemical properties similar to water . The water temperature is no higher than 105 degree Celsius.LG series vertical single-suction multi-stage centrifugal pump is vertical installation, motor shaft and pump shaft are connected by claw type shaft coupling. The pump has the advantages of compact structure, low noise and small floor space.LG series vertical single...
Flow rate: 2-200m3/h
Head: 15-250m
pump material: cast iron or stainless steel
centrifugal pump: transfer pump
-
WQB Submersible sewage explosion proof pump
The submersible sewage pump is driven by explosion proof motor and used to transfer the wastewater with solid grain or fiber etc impurity.The motor for the pump set is strictly designed and produced according to the explosion proof standard. Motor is for filling water type explosion-proof submersible motor (YBQS). Winding wire adopts waterproof electric magnetic wire with nylon sheath. The motor cavity is filled with clean water to cool motor.The pump set can draw the superficial surface water of the working site, and can also be put into water...
Flow rate: 2-600m3/h
Head: 3-60m
pump material: cast iron or stainless steel
centrifugal pump: sewage pump
-
SQZ pneumatic oil barrel pump
SZQ pneumatic oil barrel pump (drum pump) can be directly inserted into the material barrel to pump the liquid. SZQ pneumatic oil barrel pump can transport a variety of oil, general corrosive chemicals and other liquids.According to the liquid nature of the transmission, the wet part of pump body can be made of aluminum alloy, stainless steel, 316 stainless steel etc.SZQ pneumatic oil barrel pump can transport oil, beverage and other liquid. The pump is widely used in chemical, petrochemical, fine chemical, dye chemical, environmental protecti...
Flow rate: 70-80L/MIN
Pressure: 0.03MPA
pump material: aluminum alloy,stainless steel
centrifugal pump: submerged pump
-
ISR horizontal hot water centrifugal circulating pump
ISR Horizontal hot water centrifugal pumpISR horizontal heat water centrifugal pump is a single stage single suction centrifugal pump designed according to the international standard ISO2858, which is suitable for heating, hot water, air conditioning systems of various buildings, metallurgy, rubber, printing and dyeing, sugar and other industrial sectors.ISR horizontal hot water centrifugal pump is used to convey clean water whose temperature does not exceed 105℃ and other similar liquids with similar physical and chemical properties. Medi...
Flow rate: 2-400m3/h
Head: 3-125m
pump material: cast iron or stainless steel ,bronze
centrifugal pump: transfer pump
-
SL,SP portable hand operated oil pump
The portable oil barrel pump is made of aluminum alloy, stainless steel etc material and operated by hand. The pump is used to oil transfer for oil barrel as the Submersible pump. SL,SC hand operated oil barrel pump submersible pump SL,SC hand-operated oil drum pump can be directly inserted into the liquid barrel (standard steel barrels )to extract the liquid in the barrel. SL,SC hand-operated oil drum pump can convey various kinds of oil, corrosive chemicals and other liquids. According to the nature of the liquid, the flow parts for the...
Flow rate: 20-50L/MIN
Head: 1-5M
Pump material: Cast iron, stainless steel ,aluminum alloy
centrifugal pump: submerged pump
-
Hand operated diaphragm pump
The diaphragm pump is made of cast iron,stainless steel,aluminum alloy,plastic etc material with NBR/neoprene diaphragm,valve ball or valve seat or PTFE diaphragm,valve ball or valve seat. The pump is driven by hand wheel. The pump can be used to transfer the fluids or other medium which is not easy to flow.Working principal:The hand operated diaphragm pump is a leak-free pump, which pushes the double diaphragm to reciprocate synchronously through the hand wheel. The diaphragm deformation causes changes in volume, and the inlet and outlet on...
Flow rate: 0-20m3/h
Head: 0-30m
pump material: cast iron, stainless steel,aluminum alloy and plastic etc
Hand pump: diaphragm pump
-
CYZ Self priming oil transfer pump unloading pump
CYZ-A Single stage single suction self priming centrifugal oil pump is used as a fuel oil loading pump. CYZ-A Self priming centrifugal oil ump is designed to transfer diesel and gasoline etc fuel oil. The pump is made of cast iron pump case and bronze impeller and equipped with explosion proof motor to safely convey diesel, gasoline etc fuel oil and other liquid with low flashing point. The pump may be driven by diesel engine.Self-priming design, no need bottom valve in suction pipeline and suction height is up 5meters. CYZ-A ...
Flow rate: 2-600m3/h
Head: 3-80m
pump material: cast iron case,bronze impeller, explosion-proof motor
centrifugal pump: self priming pump
-
FPL Vertical pipeline polypropylene centrifugal pump
FPL Vertical pipeline plastic pump is for single stage single suction centrifugal pump. The pump is made of reinforced polypropylene plastic material and driven by motor.FPL plastic corrosion resistant pump consists of professional motor and centrifugal plastic pump case. The pump has beautiful appearance, simple structure, easy installation and use, wide range of application and other characteristics. FPL plastic corrosion resistant pump is made of non-toxic reinforced polypropylene plastic. The pump is applicable for food,...
Flow rate: 2-100m3/h
Head: 3-50m
pump material: polypropylene
centrifugal pump: chemical pump
-
GDL multistage centrifugal vertical water pump
GDL Vertical multistage pipeline centrifugal water pump Characteristics:1. Advanced hydraulic model: high efficiency, wide range of performance. 2. Easy installation and maintenance: Pipeline installation, suction inlet and discharge outlet can be installed in the pipeline as any location and any direction, installation and maintenance is very convenient. 3. Beautiful appearance: the use of high-quality stainless steel jacket, beautiful appearance. 4. Less operation, maintenance costs: the use of high-quality mechanical seal, wear-resistant, no...
Flow rate: 2-200m3/h
Head: 20-200m
pump material: CAST IRON
centrifugal pump: multistage pump